Free SIP-VoIP on iPhone 3G networks with patched Fring
Since I have been using my SIP and VoIP integrated Nokia my sister got jealous and wanted to use (my old) her new iphone as an internet phone as well. I have installed Fringe for SIP and Skype just to face that you can only use them if you are connected to WiFi.. well that sucks!
As you all know by now, Fring has made it’s way onto the AppStore two days ago. The big limitation that most of us found out is that it’s main functions of interest that made it stand out of the crowd, it’s VOIP capabilities, could only be accessed using Wifi. Most operators would very much prefer not giving the opportunity to its users to get a hand on VOIP Apps over their network. Why? They might lose money.
Well sorry for them since there’s now a way to Patch Fring so it can be used over the 3G or EDGE networks that’s been explained in detail on Fring’s message board.
His way will not work and SSH way is tooo long.
So here is my way.
- Download the patched Fring from http://www.iphonetechzone.com/2008/10/a-patch-released-to-use-fring-over-3g-networks/
- Have or Install AppSync 3.0 for iphone OS 3.0
- Sync with iTunes
you are set to go
Well of course quality and delay depends on your network speed. In my test over vodafone 3G UK network with Iphone 3G, I had received good results with skype.. Not much delay or noise at all, and btw I live in a crappy reception zone.















April 6th, 2010 - 15:36
Impressive piece of information, let me elaborate more on VoIP. Voice over Internet Protocol has been around since many years. But due to lack of sufficient and affordable bandwidth it was not possible to carry carrier grade voice over Internet Protocol. But since the arrival of low cost internet bandwidth and new speech codecs such as G.729, G.723 which utilizes very low payload to carry carrier class voice it has recently been possible to leverage the true benefits of VoIP. G.723 codec utilizes only 6 Kbps (Kilo Bytes/sec) which is capable of maintaining a constant stream of data between peers and deliver carrier grade voice quality. Lets put this way if you have 8 Mbps internet connection, by using G.723 codec you can run upto 100 telephone lines with crystal clear and carrier grade voice quality. I am also a user of VoIP and have setup a small PBX at home. Since I have discovered VoIP I have never used traditional PSTN service.
Dear readers, if you have not yet tried VoIP I suggest that you try VoIP technology and I bet you will never want to use the traditional PSTN phone service ever again. VoIP has far more superior features to offer which traditional PSTN sadly cannot offer.
Also It has recently been possile to carry Video alongwith VoIP by using low payload video codecs. I cannot resist to tell you that by using T.38 passthrough and disabling VAD VoIP can carry FAX transmission, but beaware FAX T.38 passthrough will only work when using wide band protocols such as G.711, a-Law and u-Law.
By using ATA (Analog Telephone Adapter) which converts VoIP signals into traditional PSTN you can also using Dial-up modems to connect to various dialup services. I wont go in to the details what VoIP can offer, to cut my story short VoIP is a must to have product for every business and individual.
How VoIP Works
When we make a VoIP call, a communication channel is established between caller and called party over IP (Internet Protocol) which runs on top of computer data networks. A telephony conversation that takes place over VoIP are converted into binary data packets streams in real time and transmitted over data network, when these data packets arrive at the destination these are again converted into standard telephony conversation. This whole process of voice conversion into data, transmission and data conversion into back voice conversation takes place within less than few milliseconds. That is how a VoIP is call is transmitted over data networks. I hope that now you understand basics of how a VoIP call takes place.
What are speech codec’s and what role codec plays in VoIP?
Speech codec play a vital role in VoIP and codec determines the quality and cost of the call. Let me explain you what exactly VoIP codec’s are and how they work. You may have heard about data compression, or probably you have heard about air compressor which compresses a volume of air in enclosed container, VoIP codec’s are no different than a air compressor. Speech codec’s compresses voice into data packets and decompresses it upon arrival at destination. Some VoIP codec’s can compress huge amount of voice while maintaining QoS which means use this type of codec will cost less because it will consume just a fraction of data network. Some codec’s are just not capable of encoding huge amount of voice they simply consume huge amount of data networks bandwidth hence the cost goes up.
Following is a list of VoIP codec’s along with how much data network bandwidth they consume.
* AMR Codec
* BroadVoice Codec 16Kbps narrowband, and 32Kbps wideband
* GIPS Family – 13.3 Kbps and up
* GSM – 13 Kbps (full rate), 20ms frame size
* iLBC – 15Kbps,20ms frame size: 13.3 Kbps, 30ms frame size
* ITU G.711 – 64 Kbps, sample-based Also known as alaw/ulaw
* ITU G.722 – 48/56/64 Kbps ADPCM 7Khz audio bandwidth
* ITU G.722.1 – 24/32 Kbps 7Khz audio bandwidth (based on Polycom’s SIREN codec)
* ITU G.722.1C – 32 Kbps, a Polycom extension, 14Khz audio bandwidth
* ITU G.722.2 – 6.6Kbps to 23.85Kbps. Also known as AMR-WB. CELP 7Khz audio bandwidth
* ITU G.723.1 – 5.3/6.3 Kbps, 30ms frame size
* ITU G.726 – 16/24/32/40 Kbps
* ITU G.728 – 16 Kbps
* ITU G.729 – 8 Kbps, 10ms frame size
* Speex – 2.15 to 44.2 Kbps
* LPC10 – 2.5 Kbps
* DoD CELP – 4.8 Kbps
Switch to VoIP Today and you will never want to use traditional PSTN ever again.
Thanks
-Imran
April 23rd, 2010 - 07:51
Whats the best Voip to implement ?
April 30th, 2010 - 07:58
Is Asterisk a good IP PBX Solution ?
May 18th, 2010 - 14:24
What is the time delay for a call back on an Astertisk PBX ?
May 19th, 2010 - 07:02
Can you connect an External Telephone management system to an Asterisk PBX System ?
May 19th, 2010 - 07:13
In terms of price is an Asterisk pbx cheaper than a TDM/IP PBX system ? and what are the disadvantages of an Asterisk pbx system ?
May 19th, 2010 - 07:19
Is Linksys a good Asterisk PBX solution ?